ioLogik R2100 Series

RS-485 remote I/O with 8 analog inputs and 2 analog outputs

moxa-iologik-r2100-series-image-1-(1).jpg | Moxa
moxa-iologik-r2100-series-image-2-(1).jpg | Moxa
moxa-iologik-r2100-series-image-3-(1).jpg | Moxa

Features and Benefits

  • 8 analog input channels for millivolts (mV), voltage, and current signal with wire-off detection (at 4 to 20 mA)
  • 2-channel analog outputs for voltage, current actuator control
  • 16-bit resolution analog inputs, 12-bit resolution analog output
  • Simplifies I/O management with MXIO library for Windows or Linux
  • Firmware upgradable over RS-485

Certifications

  • moxa-ul-listed-certification-logo-image.png | Moxa
  • moxa-ce-certification-logo-image.png | Moxa
  • moxa-fcc-certification-logo-image.png | Moxa
 
Contact Sales

Introduction

The ioLogik R2100 Series was designed for system integrators to acquire and control remote analog devices over RS-485 connections. Different types of analog devices can be controlled, including sensors that read pH, conductivity, temperature, humidity, pressure, and flow, as well as actuators and valves. The ioLogik R2100 Series can be used with the standard Modbus protocol, and SCADA software or the MXIO DLL library can be used to access the server.

Easy Remote Management

Traditionally, it was difficult for users to update firmware over RS-485. Moxa now provides an easy method for updating firmware over an RS-485 network that allows users to perform remote firmware updates, reducing maintenance time and cost.

  • Analog Input Channels

    8

  • Analog Output Channels

    2

  • Isolation

    3k VDC or 2k Vrms

  • Buttons

    Reset button

  • Accuracy

    ±0.1% FSR @ 25°C
    ±0.3% FSR @ -10 to 60°C

  • Built-in Resistor for Current Input

    106 ohms

  • Connector

    Screw-fastened Euroblock terminal

  • I/O Mode

    Voltage/Current

  • Input Impedance

    900 kilo-ohms (min.)

  • Input Range

    ±150 mV
    ±500 mV
    ±5 V
    ±10 VDC
    0 to 20 mA
    4 to 20 mA

  • Resolution

    16 bits

  • Sampling Rate

    All channels: 6 samples/sec
    Per channel: 0.75 samples/sec

  • Accuracy

    ±0.1% FSR @ 25°C
    ±0.3% FSR @ -10 and 60°C

  • Connector

    Screw-fastened Euroblock terminal

  • Load Resistor

    250 ohms
    Note: 24 V of external power required when loading exceeds 1000 ohms

  • Output Range

    0 to 10 VDC
    4 to 20 mA

  • Resolution

    12-bit

  • LED Indicators

    PWR, RDY, Serial

  • Baudrate

    9600 bps to 115.2 kbps

  • Connector

    Terminal block

  • Flow Control

    None

  • No. of Ports

    1

  • Parity

    None

  • Serial Standards

    RS-485

  • ESD

    15 kV

  • Data Bits

    8

  • RS-485-2w

    Data+, Data-, GND

  • Industrial Protocols

    Modbus RTU Server (slave)

  • Power Connector

    Screw-fastened Euroblock terminal

  • No. of Power Inputs

    1

  • Input Voltage

    12 to 48 VDC

  • Power Consumption

    170 mA @ 24 VDC

  • Communication Interface

    Serial interface

  • Housing

    Plastic top cover, metal bottom plate

  • Dimensions

    115 x 79 x 45.6 mm (45.3 x 3.11 x 1.80 in)

  • Weight

    200 g (0.44 lb)

  • Installation

    DIN-rail mounting, Wall mounting

  • Wiring

    I/O cable, 16 to 26 AWG
    Power cable, 12 to 24 AWG

  • Operating Temperature

    -10 to 60°C (14 to 140°F)

  • Storage Temperature (package included)

    -40 to 85°C (-40 to 185°F)

  • Ambient Relative Humidity

    5 to 95% (non-condensing)

  • Altitude

    2000 m Please contact Moxa if you require products guaranteed to function properly at higher altitudes.

  • Freefall

    IEC 60068-2-32

  • Safety

    UL 508

  • Shock

    IEC 60068-2-27

  • Vibration

    IEC 60068-2-6

  • EMI

    CISPR 32, FCC Part 15B Class A

  • EMS

    IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
    IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m
    IEC 61000-4-4 EFT: Power: 1 kV; Signal: 0.5 kV
    IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV
    IEC 61000-4-6 CS: 3 V
    IEC 61000-4-8 PFMF

  • Green Product

    RoHS, CRoHS, WEEE

  • Time

    280,923 hrs

  • Standards

    Telcordia (Bellcore), GB

Software, Firmware, and Drivers

FILTER

Name Type Version Operating System Release Date
Firmware for ioLogik R2100 Series
48.9 KB
Firmware v1.0
2018-02-11 Feb 11, 2018 Release notes
MX-AOPC UA Logger
44.2 MB
Utility v1.1
  • Windows 10
  • Windows 7
  • Windows 8
  • Windows Server 2003
  • Windows Server 2008
  • Windows Server 2008 R2
  • Windows Server 2012
  • Windows Server 2012 R2
2017-06-14 Jun 14, 2017 Release notes
MX-AOPC UA Server
36.3 MB
Utility v1.6
  • Windows 10
  • Windows 7
  • Windows 8
  • Windows Server 2003
  • Windows Server 2008
  • Windows Server 2008 R2
  • Windows Server 2012
  • Windows Server 2012 R2
2017-06-14 Jun 14, 2017 Release notes
Software Package for ioLogik R2100 Series
19.1 MB
Software Package v1.0
2017-01-10 Jan 10, 2017 Release notes
MXIO Library for Linux Kernel 3.x
2.1 MB
Library v2.12
  • Linux 3.x
2016-12-27 Dec 27, 2016 Release notes
MXIO Library for Linux Kernel 4.x
2.1 MB
Library v2.12
  • Linux 4.x
2016-12-27 Dec 27, 2016 Release notes
MXIO .NET Library for Windows
2.7 MB
Library v1.10
  • Windows 10
  • Windows 7
  • Windows 8.1
  • Windows Server 2003
  • Windows Server 2008
  • Windows Server 2012
2016-12-27 Dec 27, 2016 Release notes
MXIO Library for Windows
2.5 MB
Library v2.12
  • Windows 10
  • Windows 7
  • Windows 8.1
  • Windows Server 2003
  • Windows Server 2008
  • Windows Server 2012
2016-12-25 Dec 25, 2016 Release notes
ioAdmin Configuration Utility
7.7 MB
Utility v3.19
  • Windows 10
  • Windows 7
  • Windows 8
  • Windows Server 2003
  • Windows Server 2008
  • Windows Server 2012
2016-11-28 Nov 28, 2016 Release notes
MXIO Library for Linux Kernel 2.6.x
1.8 MB
Library v2.11
  • Linux 2.6.x
2014-02-13 Feb 13, 2014 Release notes
Firmware for ioLogik R2100 Series (R2140)
150.8 KB
Firmware v1.2
2008-07-06 Jul 06, 2008 Release notes

Support Documents

Name Type Version Release Date
Datasheet for ioLogik R2100 Series
559.2 KB
Datasheet v1.0 2018-11-12 Nov 12, 2018
Manual for ioLogik R2100 Series
4.0 MB
Manual v1.0 2017-01-11 Jan 11, 2017
3D CAD for ioLogik 2000 ASM
173.4 KB
3D CAD 2010-06-23 Jun 23, 2010
2D CAD for ioLogik R2000
786.5 KB
2D CAD 2008-01-23 Jan 23, 2008

Available Models (1)

Show Images
moxa-iologik-r2140-image.jpg | MoxaioLogik R2140
Input/Output Interface8 x AI, 2 x AO
Operating Temp.-10 to 60°C
Add to QuoteView Bag
Added To Bag

ioLogik R2100 Series

ioLogik R2140

moxa-iologik-r2140-image.jpg | Moxa

Buy online from our distributors