Sign In

MGate 5114 Series

1-port Modbus RTU/ASCII/TCP/IEC 101-to-IEC 104 gateways

moxa-mgate-5114-series-image-(1).jpg | Moxa
moxa-mgate-5114-series-image-1-(1).jpg | Moxa
moxa-mgate-5114-series-image-2-(1).jpg | Moxa

Features and Benefits

  • Protocol conversion between Modbus RTU/ASCII/TCP, IEC 60870-5-101, and IEC 60870-5-104
  • Supports IEC 60870-5-101 master/slave (balanced/unbalanced)
  • Supports IEC 60870-5-104 client/server
  • Supports Modbus RTU/ASCII/TCP master/client and slave/server
  • Effortless configuration via web-based wizard
  • Status monitoring and fault protection for easy maintenance
  • Embedded traffic monitoring/diagnostic information for easy troubleshooting
  • microSD card for configuration backup/duplication and event logs
  • Built-in Ethernet cascading for easy wiring
  • Redundant dual DC power inputs and relay output
  • -40 to 75°C wide operating temperature models available
  • Serial port with 2 kV isolation protection
  • Security features based on IEC 62443

Certifications

  • moxa-ul-listed-certification-logo-image.png | Moxa
  • moxa-ce-certification-logo-image.png | Moxa
  • moxa-fcc-certification-logo-image.png | Moxa
 
Contact Sales

Introduction

The MGate 5114 is an industrial Ethernet gateway with 2 Ethernet ports and 1 RS-232/422/485 serial port for Modbus RTU/ASCII/TCP, IEC 60870-5-101, and IEC 60870-5-104 network communications. By integrating commonly used power protocols, the MGate 5114 provides the flexibility needed to fulfill the various conditions that arise with field devices that use different communications protocols to connect to a power SCADA system. To integrate Modbus or IEC 60870-5-101 devices onto an IEC 60870-5-104 network, use the MGate 5114 as a Modbus master/client or IEC 60870-5-101 master to collect data and exchange data with IEC 60870-5-104 systems.

Easy Configuration via Web Console

The MGate 5114 Series comes with an illustrated Quick Setup guide designed to make configuration easy. With Quick Setup, you can easily access protocol conversion modes and finish the configuration in a few steps.

Modbus RTU/ASCII/TCP Protocol Traffic Monitor

MGate 5114 Series gateways support Modbus RTU/ASCII/TCP, IEC 60870-5-101, and IEC 60870-5-104 Protocol Traffic Monitor for easy troubleshooting, especially during the installation stage. It is worth mentioning that traffic logs can be viewed in the popular troubleshooting tool, Wireshark. With this feature, you can easily analyze traffic to determine the root cause of a problem.

Maintenance Functions

MGate 5114 gateways support a system log function that records events in the MGate; users can easily review log data remotely through the web console. The gateways also support status monitoring and fault protection functions. The status monitoring function notifies a PSCADA system when a device gets disconnected or does not respond, in which case the PSCADA system gets the status of each end device and then issues alarms to notify operators.

  • 10/100BaseT(X) Ports (RJ45 connector)

    2
    Auto MDI/MDI-X connection

  • Magnetic Isolation Protection

    1.5 kV (built-in)

  • Industrial Protocols

    Modbus TCP Client (Master), Modbus TCP Server (Slave), IEC 60870-5-104 Client, IEC 60870-5-104 Server

  • Configuration Options

    Web Console (HTTP/HTTPS), Device Search Utility (DSU), Telnet Console

  • Management

    ARP, DHCP Client, DNS, HTTP, HTTPS, SMTP, SNMP Trap, SNMPv1/v2c/v3, TCP/IP, Telnet, SSH, UDP, NTP Client

  • MIB

    RFC1213, RFC1317

  • Time Management

    NTP Client

  • Console Port

    RS-232 (TxD, RxD, GND), 8-pin RJ45 (115200, n, 8, 1)

  • No. of Ports

    1

  • Connector

    DB9 male

  • Serial Standards

    RS-232/422/485

  • Baudrate

    50 bps to 921.6 kbps

  • Data Bits

    7, 8

  • Parity

    Even, Mark, None, Odd, Space

  • Stop Bits

    1, 2

  • Flow Control

    RTS Toggle (RS-232 only), RTS/CTS

  • RS-485 Data Direction Control

    ADDC® (automatic data direction control)

  • Pull High/Low Resistor for RS-485

    1 kilo-ohm, 150 kilo-ohms

  • Terminator for RS-485

    120 ohms

  • Isolation

    2 kV (built-in)

  • RS-232

    TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND

  • RS-422

    Tx+, Tx-, Rx+, Rx-, GND

  • RS-485-2w

    Data+, Data-, GND

  • RS-485-4w

    Tx+, Tx-, Rx+, Rx-, GND

  • Industrial Protocols

    Modbus RTU/ASCII Master, Modbus RTU/ASCII Slave, IEC 60870-5-101 Master (Balanced/Unbalanced), IEC 60870-5-101 Slave (Balanced/Unbalanced)

  • Configuration Options

    Serial Console

  • Mode

    Master, Slave

  • Functions Supported

    1, 2, 3, 4, 5, 6, 15, 16, 23

  • Max. No. of Commands

    128

  • Mode

    Client (Master), Server (Slave)

  • Functions Supported

    1, 2, 3, 4, 5, 6, 15, 16, 23

  • Max. No. of Client Connections

    32

  • Max. No. of Server Connections

    32

  • Max. No. of Commands

    128

  • Mode

    Client
    Server

  • Max. No. of Client Connections

    32

  • Max. No. of Server Connections

    32

  • Max. No. of Information Objects

    2000 points

  • Mode

    Master (Balanced/Unbalanced)
    Slave (Balanced/Unbalanced)

  • Max. No. of Master Connections

    1

  • Max. No. of Slave Connections

    1 (Balanced), 31 (Unbalanced)

  • Max. No. of Information Objects

    2000 points

  • microSD Slot

    Up to 32 GB (SD 2.0 compatible)

  • Input Voltage

    12 to 48 VDC

  • Input Current

    455 mA @ 12 VDC

  • Power Connector

    Screw-fastened Euroblock terminal

  • Contact Current Rating

    Resistive load: 2 A @ 30 VDC

  • Housing

    Metal

  • IP Rating

    IP30

  • Dimensions

    36 x 105 x 140 mm (1.42 x 4.14 x 5.51 in)

  • Weight

    507 g (1.12 lb)

  • Storage Temperature (package included)

    -40 to 85°C (-40 to 185°F)

  • Ambient Relative Humidity

    5 to 95% (non-condensing)

  • Operating Temperature

    MGate 5114: 0 to 60°C (32 to 140°F)
    MGate 5114-T: -40 to 75°C (-40 to 167°F)

  • Safety

    EN 60950-1, UL 508

  • EMC

    EN 55032/24

  • EMI

    CISPR 32, FCC Part 15B Class B

  • EMS

    IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
    IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
    IEC 61000-4-4 EFT: Power: 4 kV; Signal: 2 kV
    IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV
    IEC 61000-4-6 CS: 150 kHz to 80 MHz: 10 V/m; Signal: 10 V/m
    IEC 61000-4-8 PFMF

  • Hazardous Locations

    ATEX, Class I Division 2, IECEx

  • Freefall

    IEC 60068-2-32

  • Shock

    IEC 60068-2-27

  • Vibration

    IEC 60068-2-6, IEC 60068-2-64

  • Time

    1,140,815 hrs

  • Standards

    Telcordia SR332

Software, Firmware, and Drivers

FILTER

All Firmware Software Package Utility
Name Type Version Operating System Release Date
Moxa CLI Configuration Tool for Linux
8.1 MB 		Utility v1.2
  • Linux Kernel 2.6.x
  • Linux Kernel 3.x
  • Linux Kernel 4.x
 Mar 31, 2021 Mar 31, 2021 Release notes
Moxa CLI Configuration Tool for Windows
2.1 MB 		Utility v1.2
  • Windows 10
  • Windows 7
  • Windows 8
  • Windows 8.1
  • Windows Server 2008 R2
  • Windows Server 2012
  • Windows Server 2012 R2
  • Windows Server 2016
  • Windows Server 2019
 Mar 31, 2021 Mar 31, 2021 Release notes
Device Search Utility
1.1 MB 		Utility v2.4
  • Windows 10
  • Windows 2000
  • Windows 7
  • Windows 8
  • Windows 8.1
  • Windows 95
  • Windows 98 SE
  • Windows ME
  • Windows NT
  • Windows Server 2003
  • Windows Server 2008
  • Windows Server 2008 R2
  • Windows Server 2012
  • Windows Server 2012 R2
  • Windows Server 2016
  • Windows Server 2019
  • Windows Vista
  • Windows XP
 Mar 31, 2021 Mar 31, 2021 Release notes
MXview plugin
24.3 MB 		Software Package v1.1
  • Windows 10
  • Windows 7
  • Windows Server 2012 R2
  • Windows Server 2016
  • Windows Server 2019
 Mar 31, 2021 Mar 31, 2021 Release notes
MXconfig plugin
2.2 MB 		Software Package v1.1
  • Windows 10
  • Windows 7
  • Windows 8
  • Windows Server 2008 R2
  • Windows Server 2012
  • Windows Server 2012 R2
 Mar 31, 2021 Mar 31, 2021 Release notes
Firmware for MGate 5114 Series
8.7 MB 		Firmware v1.3
Mar 02, 2021 Mar 02, 2021 Release notes

Support Documents

FILTER

All 2D CAD Compatibility Guide Datasheet Manual QIG Tech Note
Name Type Version Release Date
QIG for MGate 5114 Series
427.5 KB 		QIG v1.2 Apr 28, 2021 Apr 28, 2021
Tech Note: The Security Hardening Guide for the MGate 5000 Series
779.3 KB 		Tech Note v1.0 Mar 30, 2021 Mar 30, 2021
Compatibility Guide for MGate 5114 Series (IEC 60870-5-101 Master PICS)
741.1 KB 		Compatibility Guide v1.2 Sep 17, 2020 Sep 17, 2020
Compatibility Guide for MGate 5114 Series (IEC 60870-5-101 Slave PICS)
741.1 KB 		Compatibility Guide v1.2 Sep 17, 2020 Sep 17, 2020
Compatibility Guide for MGate 5114 Series (IEC 60870-5-104 Client PICS)
806.3 KB 		Compatibility Guide v1.2 Sep 17, 2020 Sep 17, 2020
Compatibility Guide for MGate 5114 Series (IEC 60870-5-104 Server PICS)
831.0 KB 		Compatibility Guide v1.2 Sep 17, 2020 Sep 17, 2020
Manual for MGate 5114 Series
7.5 MB 		Manual v2.0 Apr 09, 2020 Apr 09, 2020
Tech Note: How to Configure the MGate 5114 with IEC 60870-5-104 SCADA
2.2 MB 		Tech Note v1.0 Jan 17, 2019 Jan 17, 2019
Datasheet for MGate 5114 Series
973.7 KB 		Datasheet v1.0 Nov 30, 2018 Nov 30, 2018
2D CAD for MGate 5114 Series
200.2 KB 		2D CAD Nov 28, 2018 Nov 28, 2018

Related Content

FILTER

All Application Note Article Solution Brochure Technology Guide White Paper

Available Models (2)

Show Images
Compare
moxa-mgate-5114-image.jpg | MoxaMGate 5114
Compare
moxa-mgate-5114-t-image.jpg | MoxaMGate 5114-T
Operating Temp.0 to 60°C-40 to 75°C
Add to QuoteView BagAdd to QuoteView Bag

Fast-Track Your Power Grid’s System Upgrade Seamlessly

Our standalone protocol gateways make it easy to convert IEC 101/104 and Modbus RTU/TCP

LEARN MORE

Please sign in

Forgot your password?
Sign In
Remember Me.
Not a member? Sign up now
 
 
Added To Bag

View Bag

MGate 5114 Series

MGate 5114

moxa-mgate-5114-image.jpg | Moxa

Buy online from our distributors

MGate 5114 Series

MGate 5114-T

moxa-mgate-5114-t-image.jpg | Moxa

Buy online from our distributors

Feedback