As of June 15, 2022, this site no longer supports Internet Explorer. Please use another browser for the best experience on our site.
Sign In

ICF-1170I Series

Industrial CAN-to-fiber converters

moxa-icf-1170i-series-image-(1).jpg | Moxa
moxa-icf-1170i-series-image-1-(1).jpg | Moxa
moxa-icf-1170i-series-image-2-(1).jpg | Moxa

Features and Benefits

  • Transmits data up to 2 km over optical fiber
  • Converts CAN signals to fiber and fiber to CAN signals
  • Baudrate up to 1 Mbps
  • Dual power inputs for redundancy
  • DIP switch for 120 ohm terminal resistance
  • DIP switch for fiber test mode
  • LEDs for Fiber Tx, Fiber Rx, Power 1, Power 2
  • Wide-temperature model available for -40 to 85°C environments
  • Fully compatible with the ISO 11898 standard

Certifications

  • moxa-ul-listed-certification-logo-image.png | Moxa
  • moxa-ce-certification-logo-image.png | Moxa
  • moxa-fcc-certification-logo-image.png | Moxa
 
Contact Sales

Introduction

The ICF-1170I Series CAN-to-fiber converters are used to convert CAN signals from copper to optical fiber. The converters come with 2 kV optical isolation for the CAN bus system and dual power inputs with alarm contact relay to ensure that your CAN bus system will remain online.

Fiber Test Mode

Fiber Test Mode can be used to test the fiber cable between two ICF-1170I units, and it provides a simple way to determine if the fiber cable is transmitting data correctly. When in Fiber Test Mode, the fiber transceiver (Tx) will continuously send out a data signal and the Fiber Tx LED will light up. On the other side of the connection, when the ICF-1170I fiber transceiver (Rx) receives the data signal from the Tx side, the Fiber Rx LED will light up.

  • Optical Fiber

    100BaseFX ports (multi-mode ST connector)

  • Optical Fiber

    Low-Speed Fiber Module Multi-Mode
    Fiber Cable Requirements 50/125 µm, 800 MHz
    62.5/125 µm, 500 MHz
    Typical Distance 5 km
    Wavelength Typical (nm) 850
    TX Range (nm) 840 to 860
    RX Range (nm) 800 to 900
    Optical Power TX Range (dBm) 0 to -5
    RX Range (dBm) 0 to -20
    Link Budget (dB) 15
    Dispersion Penalty (dB) 1

  • Isolation

    2 kV (built-in)

  • No. of Ports

    1

  • Signals

    CAN_L, CAN_H, CAN Signal GND

  • Terminator

    N/A, 120 ohms (by DIP)

  • Input Current

    221 mA @ 12 to 48 VDC

  • Power Consumption

    221 mA @ 12 to 48 VDC

  • Input Voltage

    12 to 48 VDC

  • No. of Power Inputs

    2

  • Overload Current Protection

    Supported

  • Power Connector

    Terminal block (for DC models)

  • Housing

    Metal

  • IP Rating

    IP30

  • Dimensions

    30.3 x 70 x 115 mm (1.19 x 2.76 x 4.53 in)

  • Weight

    178 g (0.39 lb)

  • Installation

    DIN-rail mounting

  • Operating Temperature

    ICF-1170I-M-ST: 0 to 60°C (32 to 140°F)
    ICF-1170I-M-ST-T: -40 to 85°C (-40 to 185°F)

  • Storage Temperature (package included)

    -40 to 85°C (-40 to 185°F)

  • Ambient Relative Humidity

    5 to 95% (non-condensing)

  • EMC

    EN 55032/35

  • EMI

    CISPR 32, FCC Part 15B Class A

  • EMS

    IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
    IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m
    IEC 61000-4-4 EFT: Power: 4 kV; Signal: 2 kV
    IEC 61000-4-5 Surge: Power: 1 kV
    IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Signal: 3 V/m
    IEC 61000-4-8 PFMF

  • Safety

    EN 62368-1, UL 508

  • Environmental Testing

    IEC 60068-2-1
    IEC 60068-2-2
    IEC 60068-2-3

  • Vibration

    IEC 60068-2-6

  • Time

    792,085 hrs

  • Standards

    Telcordia (Bellcore), GB

Support Documents

FILTER

All 2D CAD Datasheet Declaration QIG Tech Note
Name Type Version Release Date
Declaration of Conformity for ICF-1170I Series
299.5 KB 		Declaration v1.0 May 29, 2024 May 29, 2024
Datasheet for ICF-1170I Series
899.7 KB 		Datasheet v1.3 Dec 13, 2022 Dec 13, 2022
QIG for ICF-1170I Series
1.3 MB 		QIG v6.1 May 04, 2021 May 04, 2021
Tech Note for ICF-1170I Series
202.7 KB 		Tech Note v1.0 Apr 20, 2020 Apr 20, 2020
2D CAD for ICF-1170I
293.2 KB 		2D CAD May 20, 2016 May 20, 2016

Related Content

FILTER

All Solution Brochure White Paper

Available Models (2)

Show Images
Compare
moxa-icf-1170i-m-st-t-image.jpg | MoxaICF-1170I-M-ST-T
Compare
moxa-icf-1170i-m-st-image.jpg | MoxaICF-1170I-M-ST
Operating Temp.-40 to 85°C0 to 60°C
Add to QuoteView BagAdd to QuoteView Bag

Extend the Reach of Your Field Devices

Our wide range of media converters connect field devices to a variety of communication systems

LEARN MORE

Details

File Name: Firmware for Nport 6000 Series

Version: xx

SHA-512 Checksum: --checksum placeholder--

Copied to clipboard

product image

Buy online from distributors

Please sign in

Forgot your password?
Sign In
Remember Me.
Not a member? Sign up now

Do Not Share My Personal Information

To opt out of sharing your personal information for cross-context behavioral advertising, you can complete and submit the form provided below.


Please note that even if you choose to complete the form, you may still see our ads on other websites. However, these ads may not be as relevant to you as they would be if you had not opted out.

 
 
 
Added To Bag

View Bag
You have some items waiting in your bag; click here to finish your quote!

You are currently on the Global / English site.
Would you like to go to the site for your region?

Feedback