As of June 15, 2022, this site no longer supports Internet Explorer. Please use another browser for the best experience on our site.
Sign In
Home Products Industrial Network Infrastructure Ethernet Switches PoE Switches ICS-G7852A Series MRX-Q4064-L3-16XGS
MOXA

PoE Switches

We provide a wide range of PoE/PoE+/PoE++ switches with up to 90 W output per port to deliver high-speed data transmission while powering high-power devices over long distances. With an industrial-grade design, our PoE switches provide surge protection of 4 kV per LAN port. Additionally, Smart PoE management features simplify PoE network deployment and maintenance.

MRX-Q4064-L3-16XGS
ICS-G7852A Series

Layer 3 modular managed 2.5 Gigabit Ethernet switch with 16 10GbE SFP+ ports, 3 slots for 16-port Gigabit or 2.5 Gigabit Ethernet modules, 2 isolated power supplies (90 to 264 VAC), -10 to 60°C operating temperature

Ethernet Interface

  • 1000/2500/10000BaseSFP Ports

    • 16

  • Out-of-band Management (OOBM)

    • 1 x 8-pin RJ45 1GbE Ethernet port (MGMT)

  • Module

    • There are 3 module slots on the switch. Users can select different types of modules to insert into the switch. The modules that can be selected include 16-port modules with 1000BaseT(X), 1000/2500BaseT(X), 1000BaseSFP, or 1000/2500BaseSFP interfaces.

      Refer to Expansion Modules in the Accessories section for a full list of supported interface modules.

  • Standards

    • IEEE 802.1D-2004 for Spanning Tree Protocol
      IEEE 802.1p for Class of Service
      IEEE 802.1Q for VLAN Tagging
      IEEE 802.1s for Multiple Spanning Tree Protocol
      IEEE 802.1w for Rapid Spanning Tree Protocol
      IEEE 802.1X for Authentication
      IEEE 802.3ab for 1000BaseT(X)
      IEEE 802.3ad for Port Trunk with LACP
      IEEE 802.1ad for Q-in-Q
      IEEE 802.3x for Flow Control
      IEEE 802.3z for 1000BaseSX/LX/LHX/ZX
      IEEE 802.3bz for 2.5GBaseX
      IEEE 802.3ae for 10 Gigabit Ethernet
      IEEE 802.3az for Energy-Efficient Ethernet
      ITU-T G.8032 Ethernet Ring Protection Switching
Ethernet Software Features

  • Management

    • ARP
      Back Pressure Flow Control
      DHCP Client
      Fiber check
      Flow control
      HTTP
      HTTPS
      IPv4
      Linkup Delay
      LLDP
      Port Mirroring (SPAN, RSPAN)
      Private MIB
      RARP
      RMON
      SFTP
      SMTP
      SNMP Inform
      SNMP Trap
      SNMPv1/v2c/v3
      Telnet
      TFTP
      Syslog

  • Filter

    • 802.1Q
      GARP
      GMRP
      GVRP
      IGMP Querier
      IGMP Snooping v1/v2/v3
      Q-in-Q

  • Redundancy Protocols

    • ERPS v2
      Link Aggregation
      MRP
      MRP Interconnection
      MSTP
      Multiple Dual-Homing
      Multiple Network Coupling
      Network Loop Protection
      Ring Coupling
      RSTP
      STP
      Tracking
      Turbo Chain
      Turbo Ring v2

  • Routing Redundancy

    • VRRP

  • Security

    • Access control list
      Broadcast storm protection
      DHCP Snooping
      Dynamic ARP Inspection
      HTTPS/SSL
      IP Source Guard
      Login and password policy
      MAC authentication bypass
      RADIUS
      Rate Limit
      Secure Boot
      SSH
      Static port lock
      Sticky MAC
      TACACS+
      Trust access control

  • Time Management

    • SNTP
      IEEE 1588v2 PTP (hardware-based)
      NTP Server/Client
      NTP Authentication

  • Protocols

    • 802.1X
      ARP
      DHCP Client
      DNS
      HTTP
      HTTPS
      ICMP
      IPv4
      NTP Client
      QoS
      RARP
      RMON
      SMTP
      SNMPv1/v2c/v3
      Syslog
      TCP/IP
      Telnet
      TFTP
      UDP
      VLAN Assignment

  • Industrial Protocols

    • EtherNet/IP
      Modbus TCP
      PROFINET

  • Unicast Routing

    • OSPF
      Static Route

  • MIB

    • P-BRIDGE MIB
      Q-BRIDGE-MIB
      IEEE8021-SPANNING-TREE-MIB
      IEEE8021-PAE-MIB
      IEEE8023-LAG-MIB
      LLDP-EXT-DOT1-MIB
      LLDP-EXT-DOT3-MIB
      SNMPv2-MIB
      RMON MIB Groups 1, 2, 3, 9
Switch Properties

  • MAC Table Size

    • 32 K

  • Max. No. of VLANs

    • 512

  • IGMP Groups

    • 2048

  • Jumbo Frame Size

    • 9.6 KB

  • Packet Buffer Size

    • 6 MB

  • Priority Queues

    • 8

  • VLAN ID Range

    • VID 1 to 4094
USB Interface

  • Storage Port

    • USB Type A
MicroSD Interface

  • Storage Port

    • microSD card
Serial Interface

  • Console Port

    • RS-232 (RJ45)
Input/Output Interface

  • Alarm Contact Channels

    • 1 relay output with current carrying capacity of 2 A @ 30 VDC
Power Parameters

  • Input Voltage

    • 100-240 VAC, 50-60 Hz or 230-240 VDC (for each power supply)

  • Operating Voltage

    • 90-264 VAC, 47-63 Hz or 180-300 VDC (for each power supply)

  • Overload Current Protection

    • Supported

  • Reverse Polarity Protection

    • Supported

  • Input Current

    • Max. 2.703 A @ 110 VAC
      Max. 1.339 A @ 220 VAC
      Max. 1.615 A @ 180 VDC
      Max. 0.948 A @ 300 VDC

  • Power Consumption (Max.)

    • Max. 297 W @ 110 VAC
      Max. 287.3 W @ 220 VAC
      Max. 290.3 W @ 180 VDC
      Max. 284.3 W @ 300 VDC

      Note: These are the maximum power consumption ratings for the device with the maximum number of modules installed.

  • Power Module

    • 2 x slots (2 x PWR-300-HVA-IF power modules included)
Physical Characteristics

  • IP Rating

    • IP30

  • Dimensions

    • 440 x 88 x 420 mm (17.32 x 3.46 x 16.54 in)

  • Weight

    • 12 kg (26 lb)

  • Fan Module

    • 8 x slots (8 x XM-4000-FAN-R preinstalled)

  • Installation

    • Rack mounting

  • Interactive Interface

    • Onboard LCM display
      Push buttons for configuration
Environmental Limits

  • Operating Temperature

    • -10 to 60°C (-14 to 140°F)

  • Storage Temperature (package included)

    • -40 to 85°C (-40 to 185°F)

  • Ambient Relative Humidity

    • 5 to 95% (non-condensing)
Standards and Certifications

  • Safety

    • UL 62368-1
      UL 61010-2-201
      IEC 62368-1

  • EMC

    • EN 55032/35
      EN 61000-6-2/-6-4

  • EMI

    • CISPR 32, FCC Part 15B Class A

  • EMS

    • IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV
      IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m
      IEC 61000-4-4 EFT: Power: 2 kV; Signal: 2 kV
      IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV
      IEC 61000-4-6 CS: 10 V
      IEC 61000-4-8 PFMF
      IEC 61000-4-11 Voltage Dips & Interruptions

  • Railway

    • EN 50121-4

  • Shock

    • IEC 60068-2-27

  • Vibration

    • IEC 60068-2-6

  • Package Drop Test

    • ISTA 1A

  • Package Vibration Test

    • ISTA 1A
MTBF

  • Time

    • 1,337,959 hrs

  • Standards

    • Telcordia (Bellcore), GB
Warranty
 
 
Added To Bag

View Bag
You have some items waiting in your bag; click here to finish your quote!

You are currently on the Global / English site.
Would you like to go to the site for your region?

Feedback