Sign In

PT-G7828 Series

IEC 61850-3 28-port Layer 3 full Gigabit modular managed Ethernet switches

moxa-pt-g7828-series-image-1-(1).jpg | Moxa

Features and Benefits

  • IEC 61850-3 Edition 2 Class 2 compliant
  • Hot-swappable interface and power modules for continuous operation
  • Built-in MMS server based on IEC 61850-90-4 switch data modeling for power SCADA
  • IEEE 1588 hardware time stamp supported

Certifications

  • moxa-en50121-4-certification-logo-image.png | Moxa
  • moxa-iec61850-3-ieee1613-black-certification-logo-image.png | Moxa
  • moxa-ul-listed-certification-logo-image.png | Moxa
  • moxa-ce-certification-logo-image.png | Moxa
 
Contact Sales

Introduction

The PT-G7828 modular switches provide up to 28 Gigabit ports, including 4 fixed ports, 6 interface module slots, and 2 power module slots to ensure sufficient flexibility for a variety of applications. The PT-G7828 Series is designed to meet evolving network requirements, including a hot-swappable module design that enables you to change or add devices without shutting down your device.

The multiple Ethernet modules (RJ45, SFP, and PoE) and power units (24/48 VDC, 110/220 VAC/VDC) provide even greater flexibility as well as suitability for different operating conditions. The switches support a full Gigabit platform that provides enough bandwidth to set up an Ethernet backbone. Certifications include IEC 61850 Edition 2 Class 2 to ensure high availability and wide usage.

  • 10/100/1000BaseT(X) Ports (RJ45 connector)

    2

  • 100/1000BaseSFP Ports

    2

  • Module

    6

  • Slot Combination

    See the LM-7000H datasheet for Gigabit Ethernet module and PoE+ module information

  • Standards

    IEEE 802.3 for 10BaseT
    IEEE 802.3u for 100BaseT(X) and 100BaseFX
    IEEE 802.3ab for 1000BaseT(X)
    IEEE 802.3z for 1000BaseX
    IEEE 802.1D-2004 for Spanning Tree Protocol
    IEEE 802.1w for Rapid Spanning Tree Protocol
    IEEE 802.1p for Class of Service
    IEEE 802.1Q for VLAN Tagging
    IEEE 802.1X for authentication
    IEEE 802.3ad for Port Trunk with LACP
    IEEE 802.3x for flow control

  • Management

    IPv4/IPv6, SNMP Inform, SNMPv1/v2c/v3, DHCP Server/Client, DHCP Option 66/67/82, BOOTP, TFTP, LLDP, RARP, HTTP, HTTPS, Telnet, Flow control, Back Pressure Flow Control, Port Mirror, Fiber check, Dying Gasp, SMTP, Syslog

  • MIB

    MIB-II, Ethernet-like MIB, Bridge MIB, P-BRIDGE MIB, Q-BRIDGE MIB, RSTP MIB, RMON MIB Groups 1, 2, 3, 9

  • Filter

    802.1Q, GMRP, GVRP, IGMP v1/v2/v3, QinQ VLAN

  • Redundancy Protocols

    Link Aggregation, MSTP, RSTP, STP, Turbo Chain, Turbo Ring v1/v2, V-ON

  • Security

    RADIUS, TACACS+, SSH, Port Lock, Broadcast storm protection, MAB authentication, Sticky MAC, Access control list

  • Time Management

    NTP Server/Client, SNTP, IEEE 1588v2 PTP (hardware-based)

  • Power Substation

    IEC 61850 QoS, GOOSE Check

  • Industrial Protocols

    EtherNet/IP, Modbus TCP

  • Unicast Routing

    Static Route, RIPV1/V2, OSPF

  • Multicast Routing

    DVMRP, PIM-DM

  • Routing Redundancy

    VRRP

  • Priority Queues

    8

  • Max. No. of VLANs

    512

  • VLAN ID Range

    VID 1 to 4094

  • IGMP Groups

    4096

  • MAC Table Size

    16 K

  • Packet Buffer Size

    12 Mbits

  • Jumbo Frame Size

    9.6 KB

  • Console Port

    Micro USB Type B

  • Storage Port

    USB Type A

  • Input Voltage

    with PWR-HV-P48 installed:
    110/220 VDC/VAC for the switch system
    48 VDC for PoE system (53 to 57 VDC is recommended for PoE+ devices)

    with PWR-LV-P48 installed:
    24/48 VDC for the switch system
    48 VDC for PoE system (53 to 57 VDC is recommended for PoE+ devices)

    with PWR-HV-NP installed:
    110/220 VDC/VAC for the switch system

    with PWR-LV-NP installed:
    24/48 VDC for the switch system

  • Operating Voltage

    with PWR-HV-P48 installed:
    88 to 300 VDC, 90 to 264 VAC for the switch system
    46 to 57 VDC for PoE systems

    with PWR-LV-P48 installed:
    18 to 72 VDC for the switch system
    46 to 57 VDC for PoE systems

    with PWR-HV-NP installed:
    88 to 300 VDC, 90 to 264 VAC for the switch system

    with PWR-LV-NP installed:
    18 to 72 VDC for the switch system

  • Input Current

    with PWR-HV-P48 installed:
    PWR input current (switch system)
    Max. 0.11 A @ 110 VDC
    Max. 0.06 A @ 220 VDC
    Max. 0.29 A @ 110 VAC
    Max. 0.18 A @ 220 VAC
    EPS input current (PoE system)
    Max. 0.53 A @ 48 VDC
    (excluding power consumption of PoE devices)

    with PWR-LV-P48 installed:
    PWR input current (switch system)
    Max. 0.53 A @ 24 VDC
    Max. 0.28 A @ 48 VDC
    EPS input current (PoE system)
    Max. 0.53 A @ 48 VDC
    (excluding power consumption of PoE devices)

    with PWR-HV-NP installed:
    PWR input current (switch system)
    Max. 0.11 A @ 110 VDC
    Max. 0.06 A @ 220 VDC
    Max. 0.29 A @ 110 VAC
    Max. 0.18 A @ 220 VAC

    with PWR-LV-NP installed:
    PWR input current (switch system)
    Max. 0.53 A @ 24 VDC
    Max. 0.28 A @ 48 VDC

  • IP Rating

    IP30

  • Dimensions

    443 x 44 x 280 mm (17.44 x 1.73 x 11.02 in)

  • Weight

    3080 g (6.8 lb)

  • Installation

    19-inch rack mounting

  • Operating Temperature

    -40 to 85°C (-40 to 185°F)

  • Storage Temperature (package included)

    -40 to 85°C (-40 to 185°F)

  • Ambient Relative Humidity

    5 to 95% (non-condensing)

  • EMC

    EN 55032/24

  • EMI

    CISPR 32, FCC Part 15B Class A

  • EMS

    IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
    IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m
    IEC 61000-4-4 EFT: Power: 4 kV; Signal: 4 kV
    IEC 61000-4-5 Surge: Power: 4 kV; Signal: 4 kV
    IEC 61000-4-6 CS: 10 V
    IEC 61000-4-8 PFMF

  • Power Substation

    IEC 61850-3 Edition 2.0 Class 2, IEEE 1613

  • Railway

    EN 50121-4

  • Safety

    UL 62368-1, EN 62368-1

  • Time

    449,542 hrs

  • Standards

    Telcordia (Bellcore), GB

Software, Firmware, and Drivers

FILTER

All Firmware Library Software Package
Name Type Checksum Version Operating System Release Date
Software Package for PT-G7828 Series
256.1 KB 		Software Package
SHA-512
v1.2
Feb 11, 2022 Feb 11, 2022 Release notes
Firmware for PT-G7828 Series
3.9 MB 		Firmware
SHA-512
v6.2
Feb 11, 2022 Feb 11, 2022 Release notes
MXview v3.2.6 Software
417.7 MB 		Software Package
SHA-512
v3.2.6
  • Windows 10
  • Windows 7
  • Windows Server 2012 R2
  • Windows Server 2016
  • Windows Server 2019
 Jan 07, 2022 Jan 07, 2022 Release notes
EtherNet IP Factory Talk View for PT-G7828
363.4 KB 		Software Package
SHA-512
v1.1
Jan 28, 2019 Jan 28, 2019 Release notes
PROFINET GSD file for PT-G7828 Series
11.5 KB 		Software Package
SHA-512
v1.0
Jan 14, 2018 Jan 14, 2018 Release notes
SNMP MIB file for PT-G7828 Series
249.1 KB 		Library
SHA-512
v1.1
Jan 11, 2018 Jan 11, 2018 Release notes

Support Documents

FILTER

All 2D CAD Datasheet Manual QIG Tech Note
Name Type Version Release Date
Moxa Command Line Interface (FW 5.x) User's Manual
1.8 MB 		Manual v1.5 Apr 01, 2022 Apr 01, 2022
Manual for PT-G7828 Series
5.9 MB 		Manual v1.5 Mar 22, 2022 Mar 22, 2022
QIG for PT-G7728/G7828 Series
694.9 KB 		QIG v1.4 Feb 11, 2022 Feb 11, 2022
Datasheet for PT-G7828 Series
2.1 MB 		Datasheet v1.5 Jun 23, 2020 Jun 23, 2020
Layer 3 Routing (UI 2.0) User's Manual
670.9 KB 		Manual v3.3 Feb 12, 2019 Feb 12, 2019
Moxa Command Line Interface (FW 5.x) User's Manual
2.5 MB 		Manual v1.2 Feb 12, 2019 Feb 12, 2019
Moxa Managed Ethernet Switch Redundancy Protocol (UI 2.0) User's Manual
1.7 MB 		Manual v4.1 Feb 12, 2019 Feb 12, 2019
Tech Note: Recommended Procedure for STP Cable Grounding on Moxa's Industrial Ethernet Switches
558.3 KB 		Tech Note v1.0 Feb 12, 2019 Feb 12, 2019
2D CAD for PT-G7728-G7828
384.1 KB 		2D CAD Jan 19, 2018 Jan 19, 2018
Industrial Protocols User's Guide
6.9 MB 		Manual v6.0 Jun 02, 2014 Jun 02, 2014

Related Content

FILTER

All Solution Brochure White Paper

Available Models (1)

Show Images
Compare
moxa-pt-g7828-image.jpg | MoxaPT-G7828
Layer3
100/1000Base SFP Slots2 to 26
10/100/1000BaseT(X) Ports
RJ45 Connector		2 to 26
PoE Ports, 10/100/1000Base T(X)
RJ45 Connector		0 to 24
Operating Temp.-40 to 85°C
Add to QuoteView Bag

Details

File Name: Firmware for Nport 6000 Series

Version: xx

SHA-512 Checksum: --checksum placeholder--

Copied to clipboard

Please sign in

Forgot your password?
Sign In
Remember Me.
Not a member? Sign up now
 
 
Added To Bag

View Bag

PT-G7828 Series

PT-G7828

moxa-pt-g7828-image.jpg | Moxa

Buy online from our distributors

Feedback