Sign In

AWK-4131A Series

Outdoor industrial IEEE 802.11a/b/g/n wireless AP/bridge/client

moxa-awk-4131a-series-image-(1).jpg | Moxa
moxa-awk-4131a-series-image-1-(1).jpg | Moxa
moxa-awk-4131a-series-image-2-(1).jpg | Moxa

Features and Benefits

  • 2x2 MIMO 802.11a/b/g/n AP/bridge/client
  • Millisecond-level Client-based Turbo Roaming The Turbo Roaming recovery time indicated herein is an average of test results documented, in optimized conditions, across APs configured with interference-free 20-MHz RF channels, WPA2-PSK security, and default Turbo Roaming parameters. The clients are configured with 3-channel roaming at 100 Kbps traffic load. Other conditions may also impact roaming performance. For more information about Turbo Roaming parameter settings, refer to the product manual.
  • Easy setup and deployment with AeroMag
  • Wireless redundancy with AeroLink Protection
  • Easy network setup with Network Address Translation (NAT)
  • Rugged industrial design with integrated antenna and power isolation
  • IP68-rated weatherproof housing designed for outdoor applications and -40 to 75°C wide operating temperature range
  • Avoid wireless congestion with 5 GHz DFS channel support

Certifications

  • moxa-wi-fi-certification-logo-image.png | Moxa
  • moxa-ul-listed-certification-logo-image.png | Moxa
  • moxa-ce-certification-logo-image.png | Moxa
  • moxa-fcc-certification-logo-image.png | Moxa
 
Contact Sales

Introduction

The AWK-4131A IP68 outdoor industrial AP/bridge/client meets the growing need for faster data transmission speeds by supporting 802.11n technology and allowing 2X2 MIMO communication with a net data rate of up to 300 Mbps. The AWK-4131A is compliant with industrial standards and approvals covering operating temperature, power input voltage, surge, ESD, and vibration. The two redundant DC power inputs increase the reliability of the power supply, and the AWK-4131A can be powered via PoE to make deployment easier. The AWK-4131A can operate on either the 2.4 GHz or 5 GHz bands and is backwards-compatible with existing 802.11a/b/g deployments to future-proof your wireless investments.

Advanced 802.11n Industrial Wireless Solution

  • 802.11a/b/g/n compliant AP/bridge/client for flexible deployment

  • Software-optimized for long-distance wireless communication with up to 1 km line of sight and external high-gain antenna (available only on 5 GHz)

  • Supports 60 clients connected concurrently

  • DFS channel support allows a wider range of 5 GHz channel selection to avoid interference from existing wireless infrastructure

Advanced Wireless Technology for Mission-critical Applications

  • Seamless roaming with client-based Turbo Roaming The Turbo Roaming recovery time indicated herein is an average of test results documented, in optimized conditions, across APs configured with interference-free 20-MHz RF channels, WPA2-PSK security, and default Turbo Roaming parameters. The clients are configured with 3-channel roaming at 100 Kbps traffic load. Other conditions may also impact roaming performance. For more information about Turbo Roaming parameter settings, refer to the product manual. for < 150 ms roaming recovery time between APs (Client mode)

  • AeroMag support for error-free setup of your industrial applications’ basic WLAN settings

  • Supports AeroLink Protection for creating a redundant wireless link (< 300 ms recovery time) between APs and their clients

Industrial Ruggedness

  • Integrated antenna and power isolation designed to provide 500 V insulation protection against external electrical interference

  • IP68-rated metal casing for complete ingress protection for any outdoor weather

  • -40 to 75°C wide operating temperature models available for smooth wireless communication in harsh environments

  • WLAN Standards

    802.11a/b/g/n
    802.11i Wireless Security

  • Modulation Type

    DSSS
    OFDM
    MIMO-OFDM

  • Frequency Band for US (20 MHz operating channels)

    2.412 to 2.462 GHz (11 channels)
    5.180 to 5.240 GHz (4 channels)
    5.260 to 5.320 GHz (4 channels) DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service.
    5.500 to 5.700 GHz (11 channels) DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service.
    5.745 to 5.825 GHz (5 channels)

  • Frequency Band for EU (20 MHz operating channels)

    2.412 to 2.472 GHz (13 channels)
    5.180 to 5.240 GHz (4 channels)
    5.260 to 5.320 GHz (4 channels) DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service.
    5.500 to 5.700 GHz (11 channels) DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service.

  • Frequency Band for JP (20 MHz operating channels)

    2.412 to 2.484 GHz (14 channels)
    5.180 to 5.240 GHz (4 channels)
    5.260 to 5.240 GHz (4 channels) DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service.
    5.500 to 5.700 GHz (11 channels) DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service.

  • Wireless Security

    WEP encryption (64-bit and 128-bit)
    WPA/WPA2-Enterprise (IEEE 802.1X/RADIUS, TKIP, AES)
    WPA/WPA2-Personal

  • Transmission Rate

    802.11b: 1 to 11 Mbps
    802.11a/g: 6 to 54 Mbps
    802.11n: 6.5 to 300 Mbps

  • Transmitter Power for 802.11a

    23±1.5 dBm @ 6 to 24 Mbps
    21±1.5 dBm @ 36 Mbps
    20±1.5 dBm @ 48 Mbps
    18±1.5 dBm @ 54 Mbps

  • Transmitter Power for 802.11n (5 GHz)

    23±1.5 dBm @ MCS0/8 20 MHz
    18±1.5 dBm @ MCS7/15 20 MHz
    23±1.5 dBm @ MCS0/8 40 MHz
    17±1.5 dBm @ MCS7/15 40 MHz

  • Transmitter Power for 802.11b

    26±1.5 dBm @ 1 Mbps
    26±1.5 dBm @ 2 Mbps
    26±1.5 dBm @ 5.5 Mbps
    25±1.5 dBm @ 11 Mbps

  • Transmitter Power for 802.11g

    23±1.5 dBm @ 6 to 24 Mbps
    21±1.5 dBm @ 36 Mbps
    19±1.5 dBm @ 48 Mbps
    18±1.5 dBm @ 54 Mbps

  • Transmitter Power for 802.11n (2.4 GHz)

    23±1.5 dBm @ MCS0/8 20 MHz
    18±1.5 dBm @ MCS7/15 20 MHz
    23±1.5 dBm @ MCS0/8 40 MHz
    17±1.5 dBm @ MCS7/15 40 MHz

  • Transmitter Power

  • Transmitter Power

    US EU JP
    2.4 GHz 26 dBm 18 dBm 18 dBm
    5 GHz (UNII-1) 23 dBm 21 dBm 21 dBm
    5 GHz (UNII-2) 23 dBm 21 dBm 21 dBm
    5 GHz (UNII-2e) 23 dBm 23 dBm 23 dBm
    5 GHz (UNII-3) 23 dBm – –
    Note: Based on regional regulations, the maximum transmission power allowed on the UNII bands is restricted in the firmware, as indicated above.

  • Receiver Sensitivity for 802.11a (measured at 5.680 GHz)

    Typ. -90 @ 6 Mbps
    Typ. -88 @ 9 Mbps
    Typ. -88 @ 12 Mbps
    Typ. -85 @ 18 Mbps
    Typ. -81 @ 24 Mbps
    Typ. -78 @ 36 Mbps
    Typ. -74 @ 48 Mbps
    Typ. -72 @ 54 Mbps
    Note Due to a limitation in the receiver sensitivity performance for channels 153 and 161, it is recommended to avoid using these channels in your critical applications.

  • Receiver Sensitivity for 802.11n (5 GHz; measured at 5.680 GHz)

    Typ. -69 dBm @ MCS7 20 MHz
    Typ. -71 dBm @ MCS15 20 MHz
    Typ. -63 dBm @ MCS7 40 MHz
    Typ. -68 dBm @ MCS15 40 MHz
    Note Due to a limitation in the receiver sensitivity performance for channels 153 and 161, it is recommended to avoid using these channels in your critical applications.

  • Receiver Sensitivity for 802.11b (measured at 2.437 GHz)

    Typ. -93 dBm @ 1 Mbps
    Typ. -93 dBm @ 2 Mbps
    Typ. -93 dBm @ 5.5 Mbps
    Typ. -88 dBm @ 11 Mbps

  • Receiver Sensitivity for 802.11g (measured at 2.437 GHz)

    Typ. -88 dBm @ 6 Mbps
    Typ. -86 dBm @ 9 Mbps
    Typ. -85 dBm @ 12 Mbps
    Typ. -85 dBm @ 18 Mbps
    Typ. -85 dBm @ 24 Mbps
    Typ. -82 dBm @ 36 Mbps
    Typ. -78 dBm @ 48 Mbps
    Typ. -74 dBm @ 54 Mbps

  • Receiver Sensitivity for 802.11n (2.4 GHz; measured at 2.437 GHz)

    Typ. -70 dBm @ MCS7 20 MHz
    Typ. -69 dBm @ MCS15 20 MHz
    Typ. -67 dBm @ MCS7 40 MHz
    Typ. -67 dBm @ MCS15 40 MHz

  • WLAN Operation Mode

    Access point, Client, Client-Router, Master, Slave, Sniffer

  • Antenna

    External, 3/6 dBi, Omni-directional

  • WLAN Antenna Connector

    2 N-type female

  • Standards

    IEEE 802.3 for 10BaseT
    IEEE 802.3u for 100BaseT(X)
    IEEE 802.3ab for 1000BaseT(X)
    IEEE 802.3af for PoE
    IEEE 802.1D-2004 for Spanning Tree Protocol
    IEEE 802.1w for Rapid Spanning Tree Protocol
    IEEE 802.1Q for VLAN Tagging

  • PoE Ports (10/100/1000BaseT(X), RJ45 connector)

    1

  • Management

    DHCP Server/Client, DNS, HTTP, IPv4, LLDP, Proxy ARP, SMTP, SNMPv1/v2c/v3, Syslog, TCP/IP, Telnet, UDP, VLAN, Wireless Search Utility, MXview, MXconfig

  • Routing

    Static Route, NAT, Port forwarding

  • Redundancy Protocols

    RSTP, STP

  • Security

    HTTPS/SSL, RADIUS, SSH

  • Time Management

    SNTP Client

  • Filter

    ICMP, MAC address, IP protocol, Port-based

  • Console Port

    RS-232, 8-pin RJ45

  • LED Indicators

    PWR, FAULT, STATE, WLAN, LAN

  • Alarm Contact Channels

    Relay output with current carrying capacity of 1 A @ 24 VDC

  • Buttons

    Reset button

  • Digital Inputs

    +13 to +30 V for state 1
    +3 to -30 V for state 0
    Max. input current: 8 mA

  • Housing

    Metal

  • IP Rating

    IP68

  • Dimensions

    224 x 147.7 x 66.5 mm (8.82 x 5.82 x 2.62 in)

  • Weight

    1,400 g (3.09 lb)

  • Installation

    Wall mounting (standard), DIN-rail mounting (optional), Pole mounting (optional)

  • Input Current

    0.64 A @ 12 VDC, 0.16 A @ 48 VDC

  • Input Voltage

    12 to 48 VDC, Redundant dual inputs, 48 VDC Power-over-Ethernet

  • Power Connector

    M12 A-coded 5-pin male connector

  • Power Consumption

    7.68 W (max.)

  • Reverse Polarity Protection

    Supported

  • Operating Temperature

    -40 to 75°C (-40 to 167°F)

  • Storage Temperature (package included)

    -40 to 85°C (-40 to 185°F)

  • Ambient Relative Humidity

    5 to 95% (non-condensing)

  • EMC

    EN 61000-6-2/-6-4

  • EMI

    CISPR 32, FCC Part 15B Class B

  • EMS

    IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
    IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
    IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV
    IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV
    IEC 61000-4-6 CS: 10 V
    IEC 61000-4-8 PFMF

  • Radio

    EN 300 328, EN 301 489-1/17, EN 301 893, FCC ID SLE-WAPN008, ANATEL, MIC, NCC, RCM, SRRC, WPC, KC

  • Safety

    EN 60950-1, UL 60950-1

  • Vibration

    IEC 60068-2-6

  • Time

    440,764 hrs

  • Standards

    Telcordia SR332

Software, Firmware, and Drivers

FILTER

All Firmware Library Software Package Utility
Name Type Version Operating System Release Date
MXview Trial Version
331.7 MB 		Software Package v3.0
  • Windows 10
  • Windows 7
  • Windows Server 2012 R2
  • Windows Server 2016
 2019-03-21 Mar 21, 2019 Release notes
Firmware for AWK-4131A Series
8.8 MB 		Firmware v1.13
2018-12-25 Dec 25, 2018 Release notes
Library for AWK-4131A Series
179.0 KB 		Library v1.13
2018-12-25 Dec 25, 2018 Release notes
Wireless Search Utility
1.8 MB 		Utility v2.6
  • Windows 2000
  • Windows 7
  • Windows 95
  • Windows 98
  • Windows ME
  • Windows NT
  • Windows Server 2003
  • Windows Server 2008
  • Windows Vista
  • Windows XP
 2017-11-26 Nov 26, 2017 Release notes
Turbo Roaming Analyzer
5.8 MB 		Utility v1.0
2017-10-02 Oct 02, 2017 Release notes

Support Documents

FILTER

All 2D CAD Datasheet Manual QIG
Name Type Version Release Date
Datasheet for AWK-4131A Series
967.8 KB 		Datasheet v1.9 2020-03-11 Mar 11, 2020
Manual for AWK-4131A Series
5.3 MB 		Manual v8.2 2020-03-05 Mar 05, 2020
QIG for AWK-4131A Series
1.4 MB 		QIG v6.0 2019-03-01 Mar 01, 2019
2D CAD for AWK-4131A
823.2 KB 		2D CAD 2017-11-24 Nov 24, 2017

Related Content

FILTER

All Application Note Solution Brochure Technology Guide White Paper

Available Models (3)

Show Images
Compare
moxa-awk-4131a-us-t-image.jpg | MoxaAWK-4131A-US-T
Compare
moxa-awk-4131a-jp-t-image.jpg | MoxaAWK-4131A-JP-T
Compare
moxa-awk-4131a-eu-t-image.jpg | MoxaAWK-4131A-EU-T
BandUSJPEU
Standards802.11a/b/g/n802.11a/b/g/n802.11a/b/g/n
Operating Temp.-40 to 75°C-40 to 75°C-40 to 75°C
Add to QuoteView BagAdd to QuoteView BagAdd to QuoteView Bag

Please sign in

Forgot your password?
Sign In
Remember Me.
Not a member? Sign up now
 
Added To Bag

View Bag

AWK-4131A Series

AWK-4131A-EU-T

moxa-awk-4131a-eu-t-image.jpg | Moxa

Buy online from our distributors

AWK-4131A Series

AWK-4131A-JP-T

moxa-awk-4131a-jp-t-image.jpg | Moxa

Buy online from our distributors

AWK-4131A Series

AWK-4131A-US-T

moxa-awk-4131a-us-t-image.jpg | Moxa

Buy online from our distributors