Sign In

AWK-1137C Series

Industrial 802.11a/b/g/n wireless client

moxa-awk-1137c-series-image-1-(1).jpg | Moxa
moxa-awk-1137c-series-image-2-(1).jpg | Moxa
moxa-awk-1137c-series-image-3-(1).jpg | Moxa
moxa-awk-1137c-series-image-4-(1).jpg | Moxa
moxa-awk-1137c-series-image-5-(1).jpg | Moxa

Features and Benefits

  • IEEE 802.11a/b/g/n compliant client
  • Comprehensive interfaces with one serial port and two Ethernet LAN ports
  • Millisecond-level Client-based Turbo Roaming The Turbo Roaming recovery time indicated herein is an average of test results documented, in optimized conditions, across APs configured with interference-free 20-MHz RF channels, WPA2-PSK security, and default Turbo Roaming parameters. The clients are configured with 3-channel roaming at 100 Kbps traffic load. Other conditions may also impact roaming performance. For more information about Turbo Roaming parameter settings, refer to the product manual.
  • Easy setup and deployment with AeroMag
  • 2x2 MIMO future-proof technology
  • Easy network setup with Network Address Translation (NAT)
  • Integrated robust antenna and power isolation
  • Anti-vibration design
  • Compact size for your industrial applications

Certifications

  • moxa-e1-certification-logo-image.png | Moxa
  • moxa-ul-listed-certification-logo-image.png | Moxa
  • moxa-ce-certification-logo-image.png | Moxa
  • moxa-fcc-certification-logo-image.png | Moxa
 
Contact Sales

Introduction

The AWK-1137C is an ideal client solution for industrial wireless mobile applications. It enables WLAN connections for both Ethernet and serial devices, and is compliant with industrial standards and approvals covering operating temperature, power input voltage, surge, ESD, and vibration. The AWK-1137C can operate on either the 2.4 or 5 GHz bands, and is backwards-compatible with existing 802.11a/b/g deployments to future-proof your wireless investments.

Industrial Ruggedness

  • Integrated antenna and power isolation designed to provide 500 V insulation protection against external electrical interference

  • -40 to 75°C wide operating temperature models (-T) available for smooth wireless communication in harsh environments

Mobility-oriented Design

  • Client-based Turbo Roaming The Turbo Roaming recovery time indicated herein is an average of test results documented, in optimized conditions, across APs configured with interference-free 20-MHz RF channels, WPA2-PSK security, and default Turbo Roaming parameters. The clients are configured with 3-channel roaming at 100 Kbps traffic load. Other conditions may also impact roaming performance. For more information about Turbo Roaming parameter settings, refer to the product manual. for < 150 ms roaming recovery time between APs

  • MIMO technology to ensure transmitting and receiving capability while on the move

  • Anti-vibration performance (with reference to IEC 60068-2-6)

Easy Integration

  • Semi-automatically configurable to reduce deployment cost

  • AeroMag support for error-free setup of your industrial applications’ basic WLAN settings

  • Various communication interfaces for connecting to different types of devices

  • One-to-many NAT to simplify your machine setup

  • WLAN Standards

    802.11a/b/g/n
    802.11i Wireless Security

  • Modulation Type

    DSSS
    OFDM
    MIMO-OFDM

  • Frequency Band for US (20 MHz operating channels)

    2.412 to 2.462 GHz (11 channels)
    5.180 to 5.240 GHz (4 channels)
    5.260 to 5.320 GHz (4 channels) DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service.
    5.500 to 5.700 GHz (11 channels) DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service.
    5.745 to 5.825 GHz (5 channels)

  • Frequency Band for EU (20 MHz operating channels)

    2.412 to 2.472 GHz (13 channels)
    5.180 to 5.240 GHz (4 channels)
    5.260 to 5.320 GHz (4 channels) DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service.
    5.500 to 5.700 GHz (11 channels) DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service.

  • Frequency Band for JP (20 MHz operating channels)

    2.412 to 2.484 GHz (14 channels)
    5.180 to 5.240 GHz (4 channels)
    5.260 to 5.320 GHz (4 channels) DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service.
    5.500 to 5.700 GHz (11 channels) DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service.

  • Wireless Security

    WEP encryption (64-bit and 128-bit)
    WPA/WPA2-Enterprise (IEEE 802.1X/RADIUS, TKIP, AES)
    WPA/WPA2-Personal

  • Transmission Rate

    802.11b: 1 to 11 Mbps
    802.11a/g: 6 to 54 Mbps
    802.11n: 6.5 to 300 Mbps

  • Transmitter Power for 802.11a

    23±1.5 dBm @ 6 to 24 Mbps
    21±1.5 dBm @ 36 Mbps
    20±1.5 dBm @ 48 Mbps
    18±1.5 dBm @ 54 Mbps

  • Transmitter Power for 802.11n (5 GHz)

    23±1.5 dBm @ MCS0/8 20 MHz
    18±1.5 dBm @ MCS7/15 20 MHz
    23±1.5 dBm @ MCS0/8 40 MHz
    18±1.5 dBm @ MCS7/15 40 MHz

  • Transmitter Power for 802.11b

    26±1.5 dBm @ 1 Mbps
    26±1.5 dBm @ 2 Mbps
    26±1.5 dBm @ 5.5 Mbps
    25±1.5 dBm @ 11 Mbps

  • Transmitter Power for 802.11g

    23±1.5 dBm @ 6 to 24 Mbps
    22±1.5 dBm @ 36 Mbps
    20±1.5 dBm @ 48 Mbps
    19±1.5 dBm @ 54 Mbps

  • Transmitter Power for 802.11n (2.4 GHz)

    23±1.5 dBm @ MCS0/8 20 MHz
    17±1.5 dBm @ MCS7/15 20 MHz
    23±1.5 dBm @ MCS0/8 40 MHz
    17±1.5 dBm @ MCS7/15 40 MHz

  • Transmitter Power

  • Transmitter Power

    US EU JP
    2.4 GHz 26 dBm 18 dBm 18 dBm
    5 GHz (UNII-1) 23 dBm 23 dBm 23 dBm
    5 GHz (UNII-2) 23 dBm 23 dBm 23 dBm
    5 GHz (UNII-2e) 23 dBm 23 dBm 23 dBm
    5 GHz (UNII-3) 23 dBm – –
    Note: Based on regional regulations, the maximum transmission power allowed on the UNII bands is restricted in the firmware, as indicated above.

  • Receiver Sensitivity for 802.11a (measured at 5.680 GHz)

    Typ. -90 @ 6 Mbps
    Typ. -88 @ 9 Mbps
    Typ. -87 @ 12 Mbps
    Typ. -85 @ 18 Mbps
    Typ. -81 @ 24 Mbps
    Typ. -78 @ 36 Mbps
    Typ. -74 @ 48 Mbps
    Typ. -73 @ 54 Mbps
    Note Due to a limitation in the receiver sensitivity performance for channels 153 and 161, it is recommended to avoid using these channels in your critical applications.

  • Receiver Sensitivity for 802.11n (5 GHz; measured at 5.680 GHz)

    Typ. -69 dBm @ MCS7 20 MHz
    Typ. -70 dBm @ MCS15 20 MHz
    Typ. -64 dBm @ MCS7 40 MHz
    Typ. -66 dBm @ MCS15 40 MHz
    Note Due to a limitation in the receiver sensitivity performance for channels 153 and 161, it is recommended to avoid using these channels in your critical applications.

  • Receiver Sensitivity for 802.11b (measured at 2.437 GHz)

    Typ. -89 dBm @ 1 Mbps
    Typ. -89 dBm @ 2 Mbps
    Typ. -89 dBm @ 5.5 Mbps
    Typ. -88 dBm @ 11 Mbps

  • Receiver Sensitivity for 802.11g (measured at 2.437 GHz)

    Typ. -88 dBm @ 6 Mbps
    Typ. -88 dBm @ 9 Mbps
    Typ. -88 dBm @ 12 Mbps
    Typ. -87 dBm @ 18 Mbps
    Typ. -84 dBm @ 24 Mbps
    Typ. -81 dBm @ 36 Mbps
    Typ. -77 dBm @ 48 Mbps
    Typ. -75 dBm @ 54 Mbps

  • Receiver Sensitivity for 802.11n (2.4 GHz; measured at 2.437 GHz)

    Typ. -70 dBm @ MCS7 20 MHz
    Typ. -70 dBm @ MCS15 20 MHz
    Typ. -64 dBm @ MCS7 40 MHz
    Typ. -65 dBm @ MCS15 40 MHz

  • WLAN Operation Mode

    Client, Client-Router, Slave, Sniffer

  • Antenna

    External, 2/2 dBi, Omni-directional

  • Antenna Connectors

    2 RP-SMA female

  • 10/100BaseT(X) Ports (RJ45 connector)

    2

  • Standards

    IEEE 802.3 for 10BaseT
    IEEE 802.3u for 100BaseT(X)
    IEEE 802.1Q for VLAN Tagging

  • Management

    DHCP Server/Client, HTTP, IPv4, LLDP, SMTP, SNMPv1/v2c/v3, Syslog, TCP/IP, Telnet, UDP, Proxy ARP, VLAN, Wireless Search Utility, MXview, MXconfig

  • Routing

    Port forwarding, Static Route, NAT

  • Security

    HTTPS/SSL, RADIUS, SSH

  • Time Management

    NTP Client, SNTP Client

  • Filter

    ICMP, MAC address, IP protocol, Port-based

  • Connector

    DB9 male

  • Serial Standards

    RS-232, RS-422/485, RS-232/422/485

  • Operation Modes

    Disabled, Real COM, RFC2217, TCP Client, TCP Server, UDP

  • Data Bits

    5, 6, 7, 8

  • Stop Bits

    1, 1.5, 2

  • Parity

    None, Even, Odd, Space, Mark

  • Flow Control

    None, RTS/CTS, XON/XOFF

  • Baudrate

    75 bps to 921.6 kbps

  • Serial Data Log

    256 KB

  • RS-232

    TxD, RxD, RTS, CTS, DCD, GND, DTR, DSR

  • RS-422

    Tx+, Tx-, Rx+, Rx-, GND

  • RS-485-2w

    Data+, Data-, GND

  • RS-485-4w

    Tx+, Tx-, Rx+, Rx-, GND

  • LED Indicators

    SYS, LAN1, LAN2, WLAN, Serial

  • Buttons

    Reset button

  • Housing

    Metal

  • IP Rating

    IP30

  • Dimensions

    77.1 x 115.5 x 26 mm (3.04 x 4.55 x 1.02 in)

  • Weight

    470 g (1.03 lb)

  • Installation

    DIN-rail mounting, Wall mounting (with optional kit)

  • Input Voltage

    9 to 30 VDC

  • Power Connector

    1 removable 3-contact terminal block(s)

  • Power Consumption

    11.7 W (max.)

  • Reverse Polarity Protection

    Supported

  • Operating Temperature

    Standard Models: 0 to 60°C (32 to 140°F)
    Wide Temp. Models: -40 to 75°C (-40 to 167°F)

  • Storage Temperature (package included)

    -40 to 85°C (-40 to 185°F)

  • Ambient Relative Humidity

    5 to 95% (non-condensing)

  • EMC

    EN 61000-6-2/-6-4, EN 55032/24

  • EMI

    CISPR 22, FCC Part 15B Class A

  • EMS

    IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
    IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
    IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV
    IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV
    IEC 61000-4-6 CS: 10 V
    IEC 61000-4-8 PFMF

  • Radio

    EN 300 328, EN 301 489-1/17, EN 301 893, FCC ID SLE-1137C, ANATEL, MIC, NCC, SRRC, WPC, KC, RCM

  • Road Vehicles

    E mark E1

  • Safety

    EN 60950-1, UL 60950-1

  • Vibration

    IEC 60068-2-6

  • Time

    1,125,942 hrs

  • Standards

    Telcordia SR332

Software, Firmware, and Drivers

FILTER

All Firmware Library Software Package Utility
Name Type Version Operating System Release Date
MXview Trial Version
331.7 MB 		Software Package v3.0
  • Windows 10
  • Windows 7
  • Windows Server 2012 R2
  • Windows Server 2016
 2019-03-21 Mar 21, 2019 Release notes
Firmware for AWK-1137C Series
8.6 MB 		Firmware v1.3
2018-12-25 Dec 25, 2018 Release notes
Library for AWK-1137C Series
159.6 KB 		Library v1.3
2018-12-25 Dec 25, 2018 Release notes
Wireless Search Utility
1.8 MB 		Utility v2.6
  • Windows 2000
  • Windows 7
  • Windows 95
  • Windows 98
  • Windows ME
  • Windows NT
  • Windows Server 2003
  • Windows Server 2008
  • Windows Vista
  • Windows XP
 2017-11-26 Nov 26, 2017 Release notes
Turbo Roaming Analyzer
5.8 MB 		Utility v1.0
2017-10-02 Oct 02, 2017 Release notes

Support Documents

FILTER

All 2D CAD Datasheet Manual QIG
Name Type Version Release Date
Datasheet for AWK-1137C Series
1.0 MB 		Datasheet v1.6 2019-11-18 Nov 18, 2019
Manual for AWK-1137C Series
5.5 MB 		Manual v4.2 2019-07-29 Jul 29, 2019
QIG for AWK-1137C Series
697.1 KB 		QIG v7.0 2018-10-15 Oct 15, 2018
2D CAD for AWK-1137C
112.8 KB 		2D CAD 2017-11-24 Nov 24, 2017

Related Content

FILTER

All Application Note Solution Brochure Technology Guide White Paper

Available Models (6)

Show Images
Compare
moxa-awk-1137c-eu-image.jpg | MoxaAWK-1137C-EU
Compare
moxa-awk-1137c-eu-t-image.jpg | MoxaAWK-1137C-EU-T
Compare
moxa-awk-1137c-jp-image.jpg | MoxaAWK-1137C-JP
Compare
moxa-awk-1137c-jp-t-image.jpg | MoxaAWK-1137C-JP-T
BandEUEUJPJP
Standards802.11a/b/g/n802.11a/b/g/n802.11a/b/g/n802.11a/b/g/n
Operating Temp.0 to 60°C-40 to 75°C0 to 60°C-40 to 75°C
Add to QuoteView BagAdd to QuoteView BagAdd to QuoteView BagAdd to QuoteView Bag
Compare
moxa-awk-1137c-us-image.jpg | MoxaAWK-1137C-US
Compare
moxa-awk-1137c-us-t-image.jpg | MoxaAWK-1137C-US-T
BandUSUS
Standards802.11a/b/g/n802.11a/b/g/n
Operating Temp.0 to 60°C-40 to 75°C
Add to QuoteView BagAdd to QuoteView Bag

Please sign in

Forgot your password?
Sign In
Remember Me.
Not a member? Sign up now
 
Added To Bag

View Bag

AWK-1137C Series

AWK-1137C-EU

moxa-awk-1137c-eu-image.jpg | Moxa

Buy online from our distributors

AWK-1137C Series

AWK-1137C-EU-T

moxa-awk-1137c-eu-t-image.jpg | Moxa

Buy online from our distributors

AWK-1137C Series

AWK-1137C-JP

moxa-awk-1137c-jp-image.jpg | Moxa

Buy online from our distributors

AWK-1137C Series

AWK-1137C-JP-T

moxa-awk-1137c-jp-t-image.jpg | Moxa

Buy online from our distributors

AWK-1137C Series

AWK-1137C-US

moxa-awk-1137c-us-image.jpg | Moxa

Buy online from our distributors

AWK-1137C Series

AWK-1137C-US-T

moxa-awk-1137c-us-t-image.jpg | Moxa

Buy online from our distributors