Sign In

AWK-3131A Series

Industrial IEEE 802.11a/b/g/n wireless AP/bridge/client

moxa-awk-3131a-series-image-1-(1).jpg | Moxa
moxa-awk-3131a-series-image-2-(1).jpg | Moxa
moxa-awk-3131a-series-image-3-(1).jpg | Moxa
moxa-awk-3131a-series-image-4-(1).jpg | Moxa
moxa-awk-3131a-series-image-5-(1).jpg | Moxa

Features and Benefits

  • IEEE 802.11a/b/g/n AP/bridge/client support
  • Easy setup and deployment with AeroMag
  • Millisecond-level Client-based Turbo Roaming The Turbo Roaming recovery time indicated herein is an average of test results documented, in optimized conditions, across APs configured with interference-free 20-MHz RF channels, WPA2-PSK security, and default Turbo Roaming parameters. The clients are configured with 3-channel roaming at 100 Kbps traffic load. Other conditions may also impact roaming performance. For more information about Turbo Roaming parameter settings, refer to the product manual.
  • Complete redundancy with AeroLink Protection
  • Easy network setup with Network Address Translation (NAT)
  • Integrated antenna and power isolation
  • -40 to 75°C wide operating temperature range (-T models)
  • 5 GHz DFS channel support

Certifications

  • moxa-atex-certification-logo-image.png | Moxa
  • moxa-ul-listed-certification-logo-image.png | Moxa
  • moxa-ce-certification-logo-image.png | Moxa
  • moxa-fcc-certification-logo-image.png | Moxa
 
Contact Sales

Introduction

The AWK-3131A 3-in-1 industrial wireless AP/bridge/client meets the growing need for faster data transmission speeds by supporting IEEE 802.11n technology with a net data rate of up to 300 Mbps. The AWK-3131A is compliant with industrial standards and approvals covering operating temperature, power input voltage, surge, ESD, and vibration. The two redundant DC power inputs increase the reliability of the power supply, and the AWK-3131A can be powered via PoE to make deployment easier. The AWK-3131A can operate on either the 2.4 or 5 GHz bands and is backwards-compatible with existing 802.11a/b/g deployments to future-proof your wireless investments. The Wireless add-on for the MXview network management utility visualizes the AWK's invisible wireless connections to ensure wall-to-wall Wi-Fi connectivity.

Advanced 802.11n Industrial Wireless Solution

  • 802.11a/b/g/n compliant AP/bridge/client for flexible deployment

  • Software optimized for long-distance wireless communication with up to 1 km line of sight and external high-gain antenna (available only on 5 GHz)

  • Supports 60 clients connected concurrently

  • DFS channel support allows a wider range of 5 GHz channel selection to avoid interference from existing wireless infrastructure

Advanced Wireless Technology

  • AeroMag supports error-free setup of your industrial applications’ fundamental WLAN settings

  • Seamless roaming with client-based Turbo Roaming The Turbo Roaming recovery time indicated herein is an average of test results documented, in optimized conditions, across APs configured with interference-free 20-MHz RF channels, WPA2-PSK security, and default Turbo Roaming parameters. The clients are configured with 3-channel roaming at 100 Kbps traffic load. Other conditions may also impact roaming performance. For more information about Turbo Roaming parameter settings, refer to the product manual. for < 150 ms roaming recovery time between APs (Client Mode)

  • Supports AeroLink Protection for creating a redundant wireless link (< 300 ms recovery time) between APs and their clients

Industrial Ruggedness

  • Integrated antenna and power isolation designed to provide 500 V insulation protection against external electrical interference

  • Hazardous location wireless communication with Class I Div. II and ATEX Zone 2 certifications

  • -40 to 75°C wide operating temperature models (-T) provided for smooth wireless communication in harsh environments

Wireless Network Management With MXview Wireless

  • Dynamic topology view shows the status of wireless links and connection changes at a glance

  • Visual, interactive roaming playback function to review the roaming history of clients

  • Detailed device information and performance indicator charts for individual AP and client devices

  • WLAN Standards

    802.11a/b/g/n
    802.11i Wireless Security

  • Modulation Type

    DSSS
    OFDM
    MIMO-OFDM

  • Frequency Band for US (20 MHz operating channels)

    2.412 to 2.462 GHz (11 channels)
    5.180 to 5.240 GHz (4 channels)
    5.260 to 5.320 GHz (4 channels) DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service.
    5.500 to 5.700 GHz (11 channels) DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service.
    5.745 to 5.825 GHz (5 channels)

  • Frequency Band for EU (20 MHz operating channels)

    2.412 to 2.472 GHz (13 channels)
    5.180 to 5.240 GHz (4 channels)
    5.260 to 5.320 GHz (4 channels) DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service.
    5.500 to 5.700 GHz (11 channels) DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service.

  • Frequency Band for JP (20 MHz operating channels)

    2.412 to 2.484 GHz (14 channels)
    5.180 to 5.240 GHz (4 channels)
    5.260 to 5.320 GHz (4 channels) DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service.
    5.500 to 5.700 GHz (11 channels) DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service.

  • Wireless Security

    WEP encryption (64-bit and 128-bit)
    WPA/WPA2-Enterprise (IEEE 802.1X/RADIUS, TKIP, AES)
    WPA/WPA2-Personal

  • Transmission Rate

    802.11b: 1 to 11 Mbps
    802.11a/g: 6 to 54 Mbps
    802.11n: 6.5 to 300 Mbps

  • Transmitter Power for 802.11a

    23±1.5 dBm @ 6 to 24 Mbps
    21±1.5 dBm @ 36 Mbps
    20±1.5 dBm @ 48 Mbps
    18±1.5 dBm @ 54 Mbps

  • Transmitter Power for 802.11n (5 GHz)

    23±1.5 dBm @ MCS0/8 20 MHz
    18±1.5 dBm @ MCS7/15 20 MHz
    23±1.5 dBm @ MCS0/8 40 MHz
    17±1.5 dBm @ MCS7/15 40 MHz

  • Transmitter Power for 802.11b

    26±1.5 dBm @ 1 Mbps
    26±1.5 dBm @ 2 Mbps
    26±1.5 dBm @ 5.5 Mbps
    25±1.5 dBm @ 11 Mbps

  • Transmitter Power for 802.11g

    23±1.5 dBm @ 6 to 24 Mbps
    21±1.5 dBm @ 36 Mbps
    19±1.5 dBm @ 48 Mbps
    18±1.5 dBm @ 54 Mbps

  • Transmitter Power for 802.11n (2.4 GHz)

    23±1.5 dBm @ MCS0/8 20 MHz
    18±1.5 dBm @ MCS7/15 20 MHz
    23±1.5 dBm @ MCS0/8 40 MHz
    17±1.5 dBm @ MCS7/15 40 MHz

  • Transmitter Power

  • Transmitter Power

    US EU JP
    2.4 GHz 26 dBm 18 dBm 18 dBm
    5 GHz (UNII-1) 23 dBm 21 dBm 21 dBm
    5 GHz (UNII-2) 23 dBm 21 dBm 21 dBm
    5 GHz (UNII-2e) 23 dBm 23 dBm 23 dBm
    5 GHz (UNII-3) 23 dBm – –
    Note: Based on regional regulations, the maximum transmission power allowed on the UNII bands is restricted in the firmware, as indicated above.

  • Receiver Sensitivity for 802.11a (measured at 5.680 GHz)

    Typ. -90 @ 6 Mbps
    Typ. -88 @ 9 Mbps
    Typ. -88 @ 12 Mbps
    Typ. -85 @ 18 Mbps
    Typ. -81 @ 24 Mbps
    Typ. -78 @ 36 Mbps
    Typ. -74 @ 48 Mbps
    Typ. -72 @ 54 Mbps
    Note Due to a limitation in the receiver sensitivity performance for channels 153 and 161, it is recommended to avoid using these channels in your critical applications.

  • Receiver Sensitivity for 802.11n (5 GHz; measured at 5.680 GHz)

    Typ. -69 dBm @ MCS7 20 MHz
    Typ. -71 dBm @ MCS15 20 MHz
    Typ. -63 dBm @ MCS7 40 MHz
    Typ. -68 dBm @ MCS15 40 MHz
    Note Due to a limitation in the receiver sensitivity performance for channels 153 and 161, it is recommended to avoid using these channels in your critical applications.

  • Receiver Sensitivity for 802.11b (measured at 2.437 GHz)

    Typ. -93 dBm @ 1 Mbps
    Typ. -93 dBm @ 2 Mbps
    Typ. -93 dBm @ 5.5 Mbps
    Typ. -88 dBm @ 11 Mbps

  • Receiver Sensitivity for 802.11g (measured at 2.437 GHz)

    Typ. -88 dBm @ 6 Mbps
    Typ. -86 dBm @ 9 Mbps
    Typ. -85 dBm @ 12 Mbps
    Typ. -85 dBm @ 18 Mbps
    Typ. -85 dBm @ 24 Mbps
    Typ. -82 dBm @ 36 Mbps
    Typ. -78 dBm @ 48 Mbps
    Typ. -74 dBm @ 54 Mbps

  • Receiver Sensitivity for 802.11n (2.4 GHz; measured at 2.437 GHz)

    Typ. -70 dBm @ MCS7 20 MHz
    Typ. -69 dBm @ MCS15 20 MHz
    Typ. -67 dBm @ MCS7 40 MHz
    Typ. -67 dBm @ MCS15 40 MHz

  • WLAN Operation Mode

    Access point, Client, Client-Router, Master, Slave, Sniffer

  • Antenna

    External, 2/2 dBi, Omni-directional

  • Antenna Connectors

    2 RP-SMA female

  • Standards

    IEEE 802.3 for 10BaseT
    IEEE 802.3u for 100BaseT(X)
    IEEE 802.3ab for 1000BaseT(X)
    IEEE 802.3af for PoE
    IEEE 802.1Q for VLAN Tagging
    IEEE 802.1X for authentication
    IEEE 802.1D-2004 for Spanning Tree Protocol
    IEEE 802.1w for Rapid Spanning Tree Protocol

  • PoE Ports (10/100/1000BaseT(X), RJ45 connector)

    1

  • Management

    DHCP Server/Client, DNS, HTTP, IPv4, LLDP, Proxy ARP, SMTP, SNMPv1/v2c/v3, Syslog, TCP/IP, Telnet, UDP, VLAN, Wireless Search Utility, MXview, MXview Wireless, MXconfig

  • Routing

    Port forwarding, Static Route, NAT

  • Redundancy Protocols

    RSTP, STP

  • Security

    HTTPS/SSL, RADIUS, SSH

  • Time Management

    SNTP Client

  • Filter

    ICMP, MAC address, IP protocol, Port-based

  • Console Port

    RS-232, 8-pin RJ45

  • LED Indicators

    PWR1, PWR2, PoE, FAULT, STATE, SIGNAL, WLAN, LAN

  • Digital Inputs

    2
    Max. input current: 8 mA
    +13 to +30 V for state 1
    +3 to -30 V for state 0

  • Alarm Contact Channels

    Relay output with current carrying capacity of 1 A @ 24 VDC

  • Buttons

    Reset button

  • Housing

    Metal

  • IP Rating

    IP30

  • Dimensions

    52.7 x 135 x 105 mm (2.08 x 5.32 x 4.13 in)

  • Weight

    860 g (1.9 lb)

  • Installation

    DIN-rail mounting, Wall mounting (with optional kit)

  • Input Current

    0.6 A @ 12 VDC, 0.15 A @ 48 VDC

  • Input Voltage

    12 to 48 VDC, Redundant dual inputs, 48 VDC Power-over-Ethernet

  • Power Connector

    1 removable 10-contact terminal block(s)

  • Power Consumption

    7.2 W (max.)

  • Reverse Polarity Protection

    Supported

  • Operating Temperature

    Standard Models: -25 to 60°C (-13 to 140°F)
    Wide Temp. Models: -40 to 75°C (-40 to 167°F)

  • Storage Temperature (package included)

    -40 to 85°C (-40 to 185°F)

  • Ambient Relative Humidity

    5 to 95% (non-condensing)

  • EMC

    EN 61000-6-2/-6-4

  • EMI

    CISPR 32, FCC Part 15B Class B

  • EMS

    IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
    IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m
    IEC 61000-4-4 EFT: Power: 2 kV; Signal: 2 kV
    IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV
    IEC 61000-4-6 CS: 3 V
    IEC 61000-4-8 PFMF

  • Hazardous Locations

    ATEX, Class I Division 2, IECEx

  • Radio

    EN 300 328, EN 301 489-1/17, EN 301 893, FCC ID SLE-WAPN008, ANATEL, MIC, NCC, RCM, SRRC, WPC, KC

  • Safety

    EN 60950-1, UL 60950-1

  • Vibration

    IEC 60068-2-6

  • Time

    570,854 hrs

  • Standards

    Telcordia SR332

Software, Firmware, and Drivers

FILTER

All Firmware Library Software Package Utility
Name Type Version Operating System Release Date
Library for AWK-3131A Series
249.0 KB 		Library v1.16
Apr 01, 2021 Apr 01, 2021 Release notes
Firmware for AWK-3131A Series
7.8 MB 		Firmware v1.16
Apr 01, 2021 Apr 01, 2021 Release notes
Library for AWK-3131A Series (MXconfig v2.6 update installer)
1.1 MB 		Library v2.6
Sep 23, 2020 Sep 23, 2020 Release notes
Utility for AWK-3131A Series (Wireless Search Utility)
1.8 MB 		Utility v2.8
Sep 23, 2020 Sep 23, 2020 Release notes
MXview Trial Version
331.7 MB 		Software Package v3.0
  • Windows 10
  • Windows 7
  • Windows Server 2012 R2
  • Windows Server 2016
 Mar 21, 2019 Mar 21, 2019 Release notes
Turbo Roaming Analyzer
5.8 MB 		Utility v1.0
Oct 02, 2017 Oct 02, 2017 Release notes

Support Documents

FILTER

All 2D CAD Datasheet Manual QIG
Name Type Version Release Date
Datasheet for AWK-3131A Series
851.4 KB 		Datasheet v2.7 Apr 01, 2021 Apr 01, 2021
Manual for AWK-3131A Series
6.3 MB 		Manual v9.0 Apr 01, 2021 Apr 01, 2021
2D CAD for AWK-3131A
465.2 KB 		2D CAD Jan 31, 2019 Jan 31, 2019
QIG for AWK-3131A Series
1.4 MB 		QIG v8.0 Jan 01, 2019 Jan 01, 2019

Related Content

FILTER

All Application Note Article Case Study Solution Brochure Technology Guide White Paper

Available Models (6)

Show Images
Compare
moxa-awk-3131a-eu-image.jpg | MoxaAWK-3131A-EU
Compare
moxa-awk-3131a-eu-t-image.jpg | MoxaAWK-3131A-EU-T
Compare
moxa-awk-3131a-jp-image.jpg | MoxaAWK-3131A-JP
Compare
moxa-awk-3131a-jp-t-image.jpg | MoxaAWK-3131A-JP-T
BandEUEUJPJP
Standards802.11a/b/g/n802.11a/b/g/n802.11a/b/g/n802.11a/b/g/n
Operating Temp.-25 to 60°C-40 to 75°C-25 to 60°C-40 to 75°C
Add to QuoteView BagAdd to QuoteView BagAdd to QuoteView BagAdd to QuoteView Bag
Compare
moxa-awk-3131a-us-image.jpg | MoxaAWK-3131A-US
Compare
moxa-awk-3131a-us-t-image.jpg | MoxaAWK-3131A-US-T
BandUSUS
Standards802.11a/b/g/n802.11a/b/g/n
Operating Temp.-25 to 60°C-40 to 75°C
Add to QuoteView BagAdd to QuoteView Bag

Please sign in

Forgot your password?
Sign In
Remember Me.
Not a member? Sign up now
 
 
Added To Bag

View Bag

AWK-3131A Series

AWK-3131A-EU

moxa-awk-3131a-eu-image.jpg | Moxa

Buy online from our distributors

AWK-3131A Series

AWK-3131A-EU-T

moxa-awk-3131a-eu-t-image.jpg | Moxa

Buy online from our distributors

AWK-3131A Series

AWK-3131A-JP

moxa-awk-3131a-jp-image.jpg | Moxa

Buy online from our distributors

AWK-3131A Series

AWK-3131A-JP-T

moxa-awk-3131a-jp-t-image.jpg | Moxa

Buy online from our distributors

AWK-3131A Series

AWK-3131A-US

moxa-awk-3131a-us-image.jpg | Moxa

Buy online from our distributors

AWK-3131A Series

AWK-3131A-US-T

moxa-awk-3131a-us-t-image.jpg | Moxa

Buy online from our distributors

Feedback